Chapter 5 Integrated Management Functions Introduction
43
On the left top of the interface, you can see the menu including the following
functions: Dashboard, FRU Information, Server Health, Configuration, Remote Control,
Auto Video Recording, Maintenance and Firmware Update.
On the right top of the interface, there are user name and login user’s user groups,
you can also use Refresh, Print, Logout and other shortcut menu.
1. Dashboard menu
In this interface, you can see the Firmware version of management chip,
modification time, MAC address and other information.
Click [Edit] after Network Information, enters network setup interface, you can set
the IP address and gateway here.
The windows under Remote Control display remote control panel information.
Click
[
Launch] after Remote Control, logging in control panel. If it prompts to install
Jviewer browser when using, please install according to the prompt.
In this interface, you can also check the relevant sensor information, such as
power supply module, CPU voltage and temperature, system fan speed, storage control
module fan speed, hard disk and power module status.
2. FRU Information menu
This menu displays FRU information, including Basic Information, Chassis
Information, Board Information, Product Information and other information. Basic
Information displays FRU device ID and name. The other three options correspond to
the information of chassis, motherboard and whole machine type respectively. Detailed
information is as follows:
