manualshive.com logo in svg

Inspur Tiansuo TS860, User Manual

Share
Download
Inspur Tiansuo TS860 User Manual Download Page 44

Chapter 4 Operating System Installation

40

automatically.

20. After the system restarts, it will enter the “Welcome” interface, so click 

<Forward> to continue.

21. The installation program enters “License Agreement” interface. Select “Yes, I 

agree to the License Agreement” and click <Forward> to continue the installation.

22. The installation program enters “Set Up Software Updates” interface and click 

<Forward> to continue the installation.

23. The installation program enters “Create User” interface. Set user name and 

password to add user; click <Forward> to continue the installation.

24. The installation program enters “Date and time” interface. Set the correct time 

and date; then click <Forward> to continue the installation.

25. The installation program enters Kdump interface. Set according to the actual 

demand and click <Forward> to continue the installation.

26. Input Username and Password to log in system.

4.2.3 Install VGA card driver

After the installation of OS, You can manually load

 

VGA card driver using the 

attached driver CD.

1. Insert Inspur driver CD into the optical drive, click Terminal menu in 

Applications →System Tools, and input in the window:

#mount /dev/cdrom   /mnt                  
#cd  /mnt                                
#cd  driver/video/linux/video 

     

#cp  xorg782-0.99-10.x86_64.rpm  /tmp              
#cd /tmp                                
#rpm -ivh xorg782-0.99-10.x86_64.rpm --force             
2. Restart system, and take out the driver CD.

Summary of Contents for Tiansuo TS860





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands