InoTec inoCOMB Picco Power, Original Operating Manual

Page: 8 / 50

Page 8
EN
Chapter 2 Safety
• This QR code will take you to the original operating man-
ual, and a 3D animation of the assembly and the func-
tion of the mixing pump (6).
• Caution: residual voltage. The device conducts voltages
of up to 180 s even after switching off (7).
• Observe all the safety and hazard notices that are at-
tached to the machine.
• Always keep the safety and hazard notices in a clearly
legible condition.
1
QR code
6
2
3
4
7
5
Instructions on the
front of the switching
cabinet
Instructions on the
top of the switching cabinet
2.4 Personnel qualification
INOTEC offers training sessions on operating the
inoCOMB Picco Power. Use INOTEC service for the ini-
tial commissioning of the machine; this also serves as an
opportunity to provide operators with training on how to
operate the mixer.
!
DANGER
If the inoCOMB Picco Power is operated
by unqualified individuals, this could put the life and
health of the operating staff at risk and cause prop-
erty damage to the inoCOMB Picco Power or other
assets.
2.2.4 Cleaning and maintaining the machine
!
WARNING
Cleaning and maintenance work can put
the safety of operating staff at risk and impair the
functionality of the machine.
1. Switch off the machine and pull out the mains plug.
2. Secure the machine against unexpectedly being
switched back on.
3. Before cleaning with the water jet, cover all the open-
ings that water must not penetrate into for safety and
functional reasons.
4. After cleaning, remove all the covers which were at-
tached to protect against the water.
2.2.5 Changing the location of the machine
The inoCOMB Picco Power is equipped with four wheels.
The inoBEAM can, therefore, be moved on the construction
site conveniently.
!
CAUTION
Changing location can put the safety of
operating staff at risk and impair the functionality of
the machine.
1. Switch off the machine and pull out the mains plug.
2. Move the machine to a new location on the building
site.
3. Always install the machine in such a way that it is level
and stable.
4. Secure the machine against undesirable movements.
5. Reconnect the machine to the external power supply
before restarting the machine.
2.3 Notices on the machine
!
DANGER
Safety notices on the machine make oper-
ating staff aware of imminent danger.
The following warning notices are affixed to the inoCOMB
Picco Power:
• WARNING. Do not reach into the machine (1).
• If there is a risk of frost, drain the water (2).
• The device may only be operated via a connector protect-
ed with an RCD (FI) I
Dh
≤ 30 mA (3).
• Switch off the main switch before opening the switching
cabinet housing (4).
• WARNING! In accordance with DGUV V3, a retest is re-
quired after every electrical modification to the machine
(5).