InoTec inoCOMB Picco Power, Original Operating Manual

Page: 16 / 50

Page 16
EN
Chapter 4 Assembly and function
4.8 Accessories
The following accessories can be supplied for the inoCOMB Picco Power.
Water/air hose
• For universal use, e.g. air, water
• GEKA couplings crimped with sleeves on both sides
Technical data:
Max. operating pressure: 15 bar
Temperature range: -20 up to +90°C
Ø
1/2”
1/2”
1/2”
3/4”
Length
10 m
15 m
20 m
20 m
Item no.
10022000
10022001
10022002
10022011
Ultralight hose
- with mortar coupling Ø
25 mm
Length
10 m
Item no.
10043874
INOTEC mortar hose
• Abrasion-resistant special hose for pumping highly pressurised wet
mortar; largely kink-proof
• For an operating pressure of 40 bar with 3 times the reliability
• Yellow on the outside: less heat builds up in the event of sun exposure
• With mortar hose, M-piece couplings and rotating V-piece (only at Ø 25 mm)
• With cam levers on the M-piece
Technical data:
Operating pressure: 40 bar
Bursting pressure: 120 bar
Ø
25 mm
25 mm
25 mm
35 mm
35 mm
Length
10 m
15 m
20 m
10 m
20 m
Item no.
10008346-001
10008346-002
10008346-003
10022032
10008346-007
Flushing hose
• For clearing blockages in mortar hoses
Length
10 m
Item no.
10024385
230 V / 3 x 2.5 mm
2
connecting cable
• 16 A Schuko plug and CEE coupling
Length
15 m
Item no.
10015126
Wireless remote control
• Wireless remote control, 3-channels, with handheld transmitter, integrated
antenna, 24 V Harting connector with LED display
• Only for devices with a control voltage of 12-24 V
Item no.
10043315
Remote control cable with remote control switch Length
16 m
32 m
Item no.
10042464
10042465
Remote control extension cable without remote control switch
• For remote control cable
• For remote control switch
• For inoCOLL one-handed gun
Length
16 m
32 m
Item no.
10015210
10042463
Remote control switch
• With 0.2 m cable, indicator light and 4-pole Harting plug
Item no.
10015134