8
General information
Installation and Programming Manual
1-5
Manuals
1-5-1
Installation and
Programming Manual
(this manual)
This Manual (not included in the package) can be purchased from your retailer.
You (the installer) should read carefully through it in order to become familiar
with all the components and operating procedures of the SmartLiving system. In
order to provide adequate protection, the installer must adhere to all the
manufacturer's guidelines relating to the active and passive security devices of
this system. It is the installer's responsibility to inform the system users that,
regardless of its capabilities, an intrusion alarm system is not a substitute for the
necessary precautions building occupants must take to prevent intrusion.
1-5-2
User's Manual
The installer should read carefully through the User's Manual (supplied with each
control panel). Once the system has been installed, you must ensure that the
User's Manual is available to the users for consultation, and that they fully
understand how the system works and are aware of all the functions, settings
and procedures.
1-6
Operator Qualifications
1-6-1
Installer
The installer is the person (or group of persons) who sets up and programs the
entire security system in accordance with the purchaser's requirements and in
respect of the safety laws in force. As the only individual in contact with system
users, it is the installer's responsibility to instruct them on how to use the
security system properly.
Under normal circumstances, the installer is not allowed to arm/disarm the
system without previous authorization from the user. All the system partitions
must be disarmed before accessing the parameter programming phase.
1-6-2
User
The users are the occupants of the building where this intrusion control panel is
installed. Only authorized users can access and operate the system.
The most common operations can be carried out without code/key verification.
This operating method must be expressly requested by the main user, as it
considerably lowers the security level of the system and may cause false alarms,
accidental arm/disarm operations, etc.
1-7
Access Levels
The normative defines the following system-access levels, regardless of system-
access limitations:
•
Level 1
- access by any person (e.g. passer-by)
•
Level 2
- user access
•
Level 3
- installer or maintenance operator access (authorized by user - level
2)
•
Level 4
- manufacturer access
1-8
Conventions – Glossary
In order to understand the terminology utilized in this manual and improve your
knowledge of this system and its operating procedures, read carefully through
the Technical Terminology – Glossary (refer to
Appendix A, Technical terminology
and Glossary
).
The appendix contains the definitions of technical terms commonly used in the
field of security, therefore, relevant to the SmartLiving system.
