Installation and Programming Manual
Installation
23
3-1-8
Connecting to a PC
Programming from a PC requires the SmartLeague software programme (refer to
paragraph
6-3 Programming via the SmartLeague programme
) and an RS232
serial cable.
Insert the RS232 serial link (accessory item) into the connector [A], as shown in
the figure opposite.
If you wish to purchase an RS232 serial link, refer to the codes in
Appendix H, Order
Codes
. If your PC is not equipped with an RS232 port, but has a USB instead, you can
use INIM's Approved RS232-USB adaptor (accessory item).
3-1-9
Connecting the SmartLogos30M
voice board (accessory item)
The SmartLogos30M voice board provides the SmartLiving system with an array
of useful voice functions.
For proper installation of the board, work carefully through the following steps.
1. Disconnect all power sources to the control panel (mains and lead batter-
ies).
2. Connect the board to the respective connector [B].
3. Power up the system from the mains and reconnect the lead batteries.
SmartLiving end
DB9F connector
PC end
DB9F connector
2
3
3
2
4
4
5
5
6
6
7
7
8
8
SmartLiving end
DB9F connector
PC end
DB25F connector
2
2
3
3
4
20
5
7
6
6
7
4
8
5
B
A
9
1
1
9
9
1
1
25
