Ingun 42600, User Manual

Page: 32 / 568

English
31
©
INGUN: Subject to technical changes without notice. E&OE.
To remove the exchangeable kit, follow the above steps in reverse order.
6.2) Opening the drive unit (debugging)
CAUTION R
ISK OF INJURY BY CRUSHING OR SHEARING
!
Risk of injury from mechanical moving parts for options with pneumatic or electrical drive sys
-
tems!

Before opening the drive unit (debugging), be sure to move the locking bolt into the locking
position! This mechanically fixes the pressure frame in the "closed" position and blocks any
movement of the pneumatic or electric drives such as the self-opening unit.
1) Bring the locking bolt into the locking
position by turning it. If necessary, move
the drive unit’s handle slightly until the
locking bolt clicks into place and locks the
drive unit.
2) Use cross-head screwdriver to loosen the
quick-release screw.
3) Open the drive unit using the handle. 4) Lift until the telescopic cover strut clicks
into place.