Ingun 42600, User Manual, Page: 35 / 568

English
©
INGUN: Subject to technical changes without notice. E&OE. 34

test probe is installed securely in the receptacle

no height differences between test probes of the same type

no bending of the test probe

correct position of the respective test probe types
The spring-loaded test probes can be removed and installed quickly without the need for addition
-
al wiring thanks to the receptacles. Specialised insertion and extract tools are available from IN
-
GUN to replace test probes.
Insertion and extraction tools for test probes
Appropriate extraction tools are also available from INGUN to replace defective receptacles. The
tool cuts into the wall of the used receptacle when screwed in. Using the spring-loaded weight, the
receptacle can then be removed without damaging the mounting hole.
7.3) Cleaning test probes
Test probes can be cleaned with commercially available, soft plastic or glass fibre brush or clean
-
Extraction tool for receptacles
1) Stop
2) Weight
3) Compression spring
4) Adapter
5) Threaded pin
6) Insert (bit)
7) Probe plate
8) Receptacle