51
GT-400 Terminal User’s Guide
Command Menu Reference: Setup Menu
Set Door Unlock Time
Set Door Unlock Time is used to define the time,
in seconds, that the relay (J5 connector) will fire
and remain active after verification. Press Set
Door Unlock Time and define the time in seconds,
starting from verification, that the relay will fire
and remain active. This may be used to unlock a
door to which a terminal is attached or to activate
any other device attached to the relay.
Default:
0
Ran
g
e:
None (0 is defined as OFF)
Dependencie
s
:
None
Who:
A site administrator can set the
amount of time the relay will fire and
remain active.
1
Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2
Press
Setup Menu.
3
Press
General
Setup.
4
Press
Set Door Unlock Time.
5
Enter the door unlock time in seconds.
6
Press
Enter.
Set CR Terminator String
Set CR Terminator String is used to define a bar
code credential's terminator string. Press Set CR
Terminator String and set the string as necessary.
Default:
3232000
Ran
g
e:
None
Dependencie
s
:
None
Who:
A site administrator can define bar
code terminator strings to comply
with site specifications.
1
Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2
Press
Setup Menu.
3
Press
General
Setup.
4
Press
Set CR Terminator String.
5
Enter the CR terminator string.
6
Press
Enter.
Summary of Contents for Schlage AMGtime G Series
