101
GT-400 Terminal User’s Guide
Troubleshooting Guide: Telnet
Returning the Terminal to Factory Settings
If you have been using a terminal in demo mode and want to convert it to network mode, you must first
delete the database and log files on the terminal. This can be done either through telnet or through the
terminal interface.
Through Telnet
1
Access the terminal through telnet.
See “Accessing a Demo Terminal Through Telnet” on page 99 for more information.
2
Type
cd RecogSys/ZODB
and press Enter.
3
Type
rm *
and press Enter.
Through the Terminal Interface
1
Clear the terminal setup.
See “Clear Setup” on page 68 for more information.
2
Clear the user database.
See “Clear UserDB” on page 72 for more information.
3
Reboot the terminal.
See “Reboot” on page 87 for more information.
Summary of Contents for Schlage AMGtime G Series
