User Education: Read Score
92
GT-400 Terminal User’s Guide
Read Score
When a user verifies his/her hand, a score of the verification quality is generated. The score is
displayed on the terminal’s display after a successful verification.
The score can be found in the interaction data for the verification. This information is viewable in the
Host Application.
The score number on the display reflects how accurately the user’s hand is placed on the platen.
Scores that vary greatly between low and high numbers are indicative of inconsistent hand placement.
Scores above 50 are indicative of improper hand placement or of a drastic change in the physical
appearance of the hand.
When this occurs, emphasize the importance of sliding the hand onto the platen and keeping the hand
flat. Re-training and practice should lower a user’s score. It might be necessary to assign an individual
user reject threshold if the user has a mild disability. Re-enrollment might be necessary to create a new
user template.
Messages Displayed During Verification
Various messages can appear on the terminal’s display during hand verification. If you enter your ID
number, but do not place your hand on the platen, the terminal will time-out in about 25 seconds. You
can immediately end this time-out by pressing
.
Me
ss
a
g
e
Definition
PLACE HAND
The platen is ready to receive your hand for verification.
OK <user name>
You are verified, proceed.
REMOVE HAND
Remove your hand and place it on the platen again. Follow proper hand
placement rules.
TRY AGAIN
Your attempt was rejected. Repeat verification following proper hand
placement rules.
TIME RESTRICTION
You are not authorized to punch in at this time. If this seems to be in
error, contact your supervisor about time restrictions.
ID INVALID
Your rejections exceeded the maximum number of tries allowed. Wait
until a supervisor has verified and try again or call your supervisor.
ENTER ID
You entered your ID number incorrectly or your access time is restricted.
MOVE THUMB
Your thumb is interfering with the read attempt. Slide your thumb to the
side of the terminal.
LIFT UP SLEEVE
Your sleeve is interfering with the read attempt. Slide your sleeve away
from the body of the terminal.
Table 7.1: Messages Displayed During Verification
ENTER
Summary of Contents for Schlage AMGtime G Series
