Ingersoll-Rand Schlage AMGtime G Series Page 69 User Manual Download

Page: 69 / 119

GT-400 Terminal User’s Guide

Command Menu Reference: Setup Menu

Display Setup

The Display Setup menu is used to configure information that is displayed on the LCD screen.

Set CompanyName

The Company Name is the first line of text that is
displayed on the terminal screen. It can be
changed to any line of text.

Default:

Schlage

Ran

none

Dependencie

none

Who:

A site administrator can change the
company name at any time.

Log into the terminal as an administrator.

See “Administrator Authentication” on page 33 for more information.

Press

Setup Menu.

Press

Display

Setup.

Press

Set Company Name.

Enter the company name.

Press

Enter.

Summary of Contents for Schlage AMGtime G Series
























































































































Search results

Summary of Contents for Schlage AMGtime G Series

Reviews:

Related manuals for Schlage AMGtime G Series

Brands by name

Popular brands

Ingersoll-Rand Schlage AMGtime G Series, User Manual

Search results

Summary of Contents for Schlage AMGtime G Series

Reviews:

Related manuals for Schlage AMGtime G Series

Brands by name

Popular brands