Ingersoll-Rand Schlage AMGtime G Series, User Manual, Page: 80 / 119

Command Menu Reference: Security Menu
72
GT-400 Terminal User’s Guide
Clear UserDB
Factory Settings
Clear UserDB
Clear UserDB will remove all users from the
terminal.
This function cannot be undone. However, all
users will be restored to the terminal the next
time the terminal synchronizes with a host
application.
Default: none
Ran g e: none
Dependencie s : none
Who: A site administrator can use Clear
UserDB to remove all users from the
terminal.
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Security Menu.
3 Press Clear UserDB.
4 Press YES.
Factory Settings
Factory Settings is a list of useful information
about the factory settings of the terminal. Factory
settings cannot be edited. The following list with
be displayed: Default: none
Ran g e: none
Dependencie s : none
Who: A site administrator can use Factory
Settings to view the factory settings
of the terminal, most likely as a
troubleshooting step.
• User Capacity: number of users that can be stored
• BPUType: type of biometric processing unit
• BoardRevision: version of the internal hardware
• MemorySizeMB: total capacity of the SD card
• SerialNum: serial number
• Model: model number
• Credential Reader Type: all available credential reader types
1 Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2 Press Security Menu.
3 Press Factory Settings.