57
GT-400 Terminal User’s Guide
Command Menu Reference: Setup Menu
Set Host Password
The host password is used to authenticate with
the host application. This password must match a
valid user account password on the host
application in order for synchronization to occur.
Default:
none
Ran
g
e:
none
Dependencie
s
:
none
Who:
A network administrator should set
the host password during initial
terminal setup.
1
Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2
Press
Setup Menu.
3
Press
Network Setup.
4
Press
Set
HostPassword.
5
Enter the host password.
6
Press
Enter.
Set Host URL
The HostURL is used to authenticate with the
host application. This URL must match URL of
the host application in order for synchronization to
occur.
Default:
none
Ran
g
e:
none
Dependencie
s
:
none
Who:
A network administrator should set
HostURL during initial terminal setup.
1
Log into the terminal as an administrator.
See “Administrator Authentication” on page 33 for more information.
2
Press
Setup Menu.
3
Press
Network Setup.
4
Press
Set
HostURL.
5
Enter the host URL.
6
Press
Enter.
Summary of Contents for Schlage AMGtime G Series
