Ingersoll-Rand Schlage AMGtime G Series, User Manual, Page: 32 / 119

Terminal Installation: Attaching the Terminal to the Wall
24
GT-400 Terminal User’s Guide
Attaching the Terminal to the Wall Plate
Remove any dust and debris from the mounting site before attaching the terminal. Dust and debris
can seriously affect the performance of the terminal.
1 Choose the standard Phillips head
screws or the security head screws for
installation.
A special tool is required to install
and remove a security head screw.
2 Terminal should already be hanging
from wall plate.
3 Rotate terminal toward the wall plate.
Make sure not to pinch or damage any
wiring.
4 Make sure that the screw holes in the
body of the terminal are aligned with
the screw holes in the wall plate.
5 Install two (2) screws into the lower
screw holes.
6 Attach side caps.
See “Removing/Installing Side
Covers” on page 22.
Figure 3.17— Installation Screw Choices
S ec u rity He a d S crew
Phillip s He a d S crew
Figure 3.18— Installation Screw Choices
Lower S crew Hole s