33
GT-400 Terminal User’s Guide
Basic Operations: Tips and Tricks
Tips and Tricks
Terminal Time-Out
•
The terminal will go back one screen level after ten (10) seconds of inactivity. The terminal will
return to the default screen after thirty (30) seconds of inactivity.
•
If you have been performing a function and fail to press a key for thirty (30) seconds, you will
need to log in as an administrator again and start over.
Entering Text
•
When you are using the Keypad to enter text, such as a last name, press
to switch to
alpha mode. Press
to switch to capital letters. If you need to enter the same letter twice,
wait a few seconds to proceed to the next letter, or use the navigation keys to proceed to the
next letter.
•
The navigation keys
can be used to move between characters in alpha-numeric entry
fields.
•
Press
and
from any command menu to return to the default screen.
Accessing Command Menus
Before performing any programming operations, you must be logged into the terminal as an
administrator.
Administrator Authentication
1
Press
and then
within three (3) seconds.
2
Enter the Credential ID for the administrator account.
3
Place your hand for verification.
4
The options displayed will vary depending on the user's authority level.
ALPHA
CAPS
FN
ENTER
ESC
ESC
ENTER
Summary of Contents for Schlage AMGtime G Series
