Labfors 5 – Version for Microorganisms
Setup and Function
Page
24
of
205
22 January 2019
Manometers are installed after each pressure reduction valve for
pressure indication. They are labelled accordingly, e.g.
Air
etc.
3.1.7 Signal Connections
The following signal connectors are situated above the mains
socket (from top to bottom):
1 25 pin Dsub Multi I/O: for connecting analogue and digital in-
put and output signals (0/4..20 mA)
2 9 pin RS232: for connecting a balance or a switchbox with up
to 7 balances
3 2 x iDDC bus: for connecting the touch screen operating unit
and one or two satellites
3.1.8 Connections for Single or Double Walled Vessels
Depending on the present temperature control system, different
connectors for either the single or double walled vessels are lo-
cated on the basic unit.
3
2
1
Summary of Contents for Labfors 5
Page 208: ......
