Labfors 5 – Version for Microorganisms
Fermentation/Cultivation
22 January 2019
Page
153
of
205
Removing residual fluid
To remove residual fluid from the system, proceed as follows:
Procedure:
1.
Hold the syringe with sample downwards, pull back the
plunger.
This removes all but a few µL of the residual fluid.
2.
Hold the sample valve with one hand; unscrew the syringe
with the other.
3.
If desired: Place the closing caps on the sample valve and on
the syringe with the sample.
9.3 Inoculation
Check and ensure the following items before inoculation:
Medium has been filled.
Heat-labile, separately sterilised substances are present.
The reagent bottles are connected with the pumps and the
culture vessel, and are filled with a sufficient amount of rea-
gents and feed solution for the duration of the entire cultivation
process.
The hoses of the reagent bottles are filled.
Summary of Contents for Labfors 5
Page 208: ......
