Labfors 5 – Version for Microorganisms
Accessories
22 January 2019
Page
85
of
205
5.20 Exit Gas Cooler
The exit gas cooler is fully equipped ex-factory.
1 Exit gas cooler
2 Adjustable hose clamp
3 Exit gas filter
4 Rapid coupling
5 Plug-in nozzle
The exit gas cooler is supplied with cooling liquid from the basic
unit. The flow of the cooling liquid can be adjusted by the manual
control valve on the basic unit.
The exit gas cooler is already equipped with pressure hoses for
water inlet (lower connector) and water outlet (upper connector).
Appropriate hoses with rapid couplings and plug-in nozzles for con-
nection to the basic unit are included.
Another piece of pressure hose is fitted onto the exit gas pipe and
equipped with a disposable exit gas filter. Hose connections and
the filter are secured with hose clamps. The hose clamp securing
the exit gas filter is equipped with a screw to loosen or tight it man-
ually.
INFORMATION
The exit gas filter must be replaced after each cultivation. The
exit gas cooler works with temperature control switched on only!
2
3
4
5
1
Summary of Contents for Labfors 5
Page 208: ......
