Labfors 5 – Version for Microorganisms
Setup and Function
Page
22
of
205
22 January 2019
The autoclavable pump heads are latched onto a mounting plate.
The mounting plate is identically as the drive shafts labelled with
the pump names.
The pump heads together with the mounting plate can easily be
plugged onto or pulled off the drive shafts.
A transparent, not autoclavable (!) cover plate made of plexiglass
(highlighted in red in the picture on the left) can be inserted into the
holder of the mounting plate for protection during operation.
3.1.3 Identification Plate
The identification plate is located on the rear of the basic equip-
ment.
The data provided on the identification plate is specified in the
main chapter “General Information”, chapter “Equipment Identifica-
tion”.
3.1.4 Mains Connection
The connection socket for the power cable of the equipment is situ-
ated on the rear side of the console. It is labelled with
Mains
.
Summary of Contents for Labfors 5
Page 208: ......
