8
Installation
NOTE
•
Set the tilt angle of
Projector A
to within 12 degrees from the level
line.
• Follow these recommendations when
installing.
- Set the
VERTICAL
adjuster to its upper-most position.
- Do not set the
ZOOM
ring to its widest position.
- Set the
HORIZONTAL
adjuster near its center position.
Preparing the elevator feet
When stacking both projectors, minimize the length of
the elevator feet using the elevator buttons on
Projec-
tor A
and
B
.
CAUTION
► Be careful when stacking both pro-
jectors. The projector on top may slide off.
Deciding on the installation position
Decide the position of
Projector A
and its projection angle. (
Quick Start Guide
→
Arrangement
and
Adjusting the projector’s elevator
)
2.2 Installing the first projector
(Projector A)
