19
STACK menu settings
3.
Press the ◄ button to return to the previous menu, or press the ► button to
save the change. (
23
)
NOTES
• If DUAL is selected, a menu to select MAIN or SUB appears on
screen when a button on the projector's control panel or remote control is
pressed. Select the projector that you want to operate. Refer to the examples
below.
- When the
MENU
button is pressed, a menu to select MAIN or SUB is
displayed. If MAIN is selected, the Main projector’s BASIC MENU or
ADVANCED MENU is displayed.
- When the
KEYSTONE
button is pressed, a menu to select MAIN or SUB is
displayed. If MAIN is selected, the Main projector’s KEYSTONE menu is
displayed.
• When LAMP MODE is set to DUAL, the following operating limitations will be
in effect:
- AUTO POWER and FREEZE
functions on both projectors will
be disabled.
-
The test patterns for CUSTOM
of GAMMA and COLOR
TEMPERATURE will not be
displayed.
- The projectors will take a
slightly
longer time to turn on. This is not a
malfunction.
Menu to select
MAIN or SUB
Menu on Main projector
Menu to select
MAIN or SUB
Menu on Main projector
(continued on next page)
3.3 Selecting the lamp operation mode
Select the DUAL or ALTERNATE lamp operation mode.
1.
Highlight LAMP MODE in the STACK menu with
the ▲/▼ buttons, then press the ► button to
display the LAMP MODE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight DUAL or ALTERNATE.
DUAL
: Turns on the projectors at the same time.
ALTERNATE
: Turns on the projectors alternately.
