background image

36

7. Troubleshooting

The following situations can be misinterpreted as a projector defect. Review the 

following table before arranging for a repair.

Situation

Description

Page Reference

Smart Stack 

does not 

function.

The Main and/or Sub projectors do not 
have power.

 

To use the Smart Stack feature, supply AC 

power to both the Main and Sub projectors.  

If AC power is supplied to only one of the 

projectors, Smart Stack is disabled.  

 

in

 Quick Start 

Guide

The RS232 cable between the Main and 
Sub projectors is not properly connected. 

To use the Smart Stack feature, connect an 

RS232 cross cable between the Main and 

Sub projectors.  If the cable is not connected, 

the Main projector cannot control the Sub 

projector.  

11

The Smart Stack menu settings are not 
working correctly. 

Check the STACK menu settings on the Main 

and Sub projectors.  To use the Smart Stack 

feature, one projector must be set to Main 

and the other projector must be set to Sub.  

18

Signal cables are not connected correctly. 

Check the cable connections.  Also verify that 

the cable connections match the port settings 

in the menu.

28

10 - 14

 

 

in

 User’s 

     Manual

The Main and 

Sub projectors 

are not 

operating in 

synchronization.

The RS232 cable between the Main and 
Sub projectors is not properly connected. 

Connect the RS232 cable properly and restart 

the Main projector.

11

(continued on next page)

Summary of Contents for IN5122








































Reviews: