InFocus IN5122, Manual

Page: 4 / 39

2
 
1. Introduction ........................3
1.1 Entries and graphical
symbols explanation ........................ 3
1.2 Important safety instruction .......... 3
Instant Stack feature ............................ 3
General installation .............................. 5
1.3 Basic information
and preparation ............................... 6
Instant Stack ........................................ 6
Smart Stack and Simple Stack ............ 6
Smart Stack and Simple Stack Remote
Control .............................................. 6
Installation options ............................... 6
Temporary terms for both projectors .... 6
2. Installation ..........................7
2.1 Smart Stack preparation ............... 7
2.2 Installing
the first projector (
Projector A
) ...... 8
Preparing the elevator feet .................. 8
Deciding on the installation position .... 8
Setting up
Projector A
........................ 9
2.3 Installing
the second projector (
Projector B
) 11
Stacking the projectors ...................... 11
Connecting projectors ........................ 11
Setting up
Projector B
...................... 12
2.4 Confirming Main
and Sub settings ............................ 14
2.5 Fine adjustment ot the image
position .......................................... 15
For Smart Stack users ....................... 15
For Simple Stack users ...................... 16
3. STACK menu settings ......17
3.1 Displaying the STACK menu ...... 17
3.2 Selecting Main, Sub or off .......... 18
3.3 Selecting lamp operation mode .. 19
3.4 Selecting lamp switching mode .. 21
3.5 Selecting the Sub input source ... 22
3.6 Saving Smart Stack settings ....... 23
STACK menu ..................................... 23
STACK menu dialogs ......................... 23
3.7 Important information
for Smart Stack .............................. 24
4. Connecting cables ...........27
4.1 Connecting an RS232 cable ....... 27
4.2 Connecting signal cables............ 28
Inputting the image from Main to Sub 28
Inputting the image
to Sub and Main separately ............ 28
5. Setting input ports
using menu .........................29
5.1 Preparing for menu operation ..... 29
5.2 Checking the Main projector's
operating status ............................. 29
5.3 Starting the Main projector ......... 30
5.4 Setting the Source Inputs ........... 31
Inputting an image from Main to Sub
- Computer signal ........................... 31
Inputting an image from Main to Sub
- Video signal
(either component or video) ........... 32
Inputting an image to
Sub and Main separately ................ 32
6. Scheduling Limitations ....34
7. Troubleshooting ...............36
Contents