15
Installation
2.5 Fine adjustment of the image position
To superimpose the images of Main (
Projector B
) and Sub (
Projector A
), use
CORNER CORRECTION to finely adjust the image size and position
of Main
(
Projector B
).
3.
Using
CORNER CORRECTION
on Main
(
Projector B
), adjust the image size and
position of Main (
Projector B
) to superimpose
well onto the image of Sub (
Projector A
).
(
User's Manual
→
BASIC MENU
or
SETUP
menu
)
The following is the recommended adjustment
method.
(1) Roughly adjust the four corners in the fol-
lowing order:
Top left → Top right
→ Bottom right → Bottom left
(2) Finely adjust the four corners in the same
order as listed above in Step 1.
NOTE
• Refer to
NOTES for all users
. (
16
)
For Smart Stack users
1.
Press the
MENU
button on the remote control or the
control panel on Main (
Projector B
) to display the
MENU dialog.
Highlight MAIN with the ▲/▼ buttons, and press the ►
button.
The Main (
Projector B
) menu will appear.
2.
Using the ▲/▼/◄/► buttons on the remote
control or the control panel on Main (
Projec-
tor B
), select CORNER CORRECTION from
the BASIC MENU, or the SETUP menu of AD-
VANCED MENU. (
User's Manual
→
BASIC
MENU
or
SETUP menu
)
The image for Smart Stack appears on
screen. This image includes a RULED LINES
screen with the CORNER CORRECTION
dialog from Main (
Projector B
) and another
RULED LINES screen from Sub (
Projector
A
).
Main (Projector B)
Image from Main (Projector B)
Image from Sub (Projector A)
Superimposed image
