Inficon ELT3000 Translation Of The Original Operating Instructions Download Page 34

Page: 34 / 74

5 | Installation

INFICON

34 / 74

ELT3000-Battery Leak-Detector-Operating-instructions-mina95en1-10-(2007)

5.5 Interfaces

NOTICE

Operating system can be hacked via USB or Ethernet

The Linux operating system used in the leak detector is not updated automatically and

can therefore contain security vulnerabilities. This vulnerability may be exploited

through the Ethernet and USB interfaces of the leak detector to provide unauthorized

access to the system.

► Ensure that no unauthorized person has access to these interfaces, for example by

using a USB port / Ethernet port lock.

► In order not to jeopardize the security of your company network, never connect the

leak detector directly to the public Internet. This is applies to connections over

WLAN as well as over Ethernet.

► However, if you want to access the web interface of the leak detector remotely, we

recommend an encrypted Virtual Private Network (VPN) connection. However, we

cannot assume any guarantee for the security of VPN connections, which are

provided by third parties.

USB interface usage

You can connect a barcode scanner or a USB flash drive via the two USB 2.0

interfaces.

RS232 interface

Communications between the Gas Detection Unit and the Gas Control Unit

RJ45 network interface

Interface for connection to an internal company network

Summary of Contents for ELT3000











































































Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands

Inficon ELT3000, Translation Of The Original Operating Instructions

Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands