Inficon ELT3000, Translation Of The Original Operating Instructions

Page: 31 / 74

INFICON Installation | 5
ELT3000-Battery Leak-Detector-Operating-instructions-mina95en1-10-(2007) 31 / 74
Designation Recommendation Comment Required Optional
Proximity switch It is possible for the
measurement to be started
immediately once the
chamber is closed by
means of a proximity
switch.
There is a M12 plug on the
back of the Gas Control
Unit.
X
Filler No conductive material;
ceramic, glass,
polypropylene blocks
Fill up a large net volume
with filler in order to
shorten the measuring time
and increase sensitivity.
X
Ideally: Fill test chamber
with test objects to
maximum capacity.
Insulation Butyl, ceramic, glass or
deep-drawn polypropylene
to cover the walls
Insulate the chamber walls
to prevent short circuits of
battery cells. Do not use
any adhesive!
X
Opening angle Cover opening angle
100-110°
X
Opening aid For heavy covers e.g. with gas-operated
springs
X
Lock for cover For heavy covers Avoid risk of crushing and
cutting injuries through
design!
X
Equipment feet Rubber feet Use anti-slip rubber feet!