Inficon ELT3000 Translation Of The Original Operating Instructions Download Page 45

Page: 45 / 74

INFICON

Operation | 6

ELT3000-Battery Leak-Detector-Operating-instructions-mina95en1-10-(2007)

45 / 74

You can either send this file to INFICON via email or request an upload link from

support.

How to provide INFICON with this data

Connect a FAT32 formatted USB flash drive to the control unit

Navigate to the "Diagnosis

→ Service Export" page in the operating unit

Press the "Export Service Data" button

The progress of the export is displayed in the operating unit and can take

several minutes (< 25 minutes) after a longer period of use.

The USB flash drive should now contain the data export. The file name

consists of the parts "ServiceExport" - "Serial number" - "Date and time".

The data export can be several megabytes (MB) in size after a longer period of use.

This is a password protected archive.

6.6.3 Delete measurement data

You can delete measurement data from the internal memory of the device.

Operator or Supervisor rights

> Measurements

Press .

All recorded measurement data is deleted.

6.6.4 Bringing up device information

►

> Device information

The stored information is displayed.

Summary of Contents for ELT3000











































































Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands

Inficon ELT3000, Translation Of The Original Operating Instructions

Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands