Inficon ELT3000 Translation Of The Original Operating Instructions Download Page 24

Page: 24 / 74

5 | Installation

INFICON

24 / 74

ELT3000-Battery Leak-Detector-Operating-instructions-mina95en1-10-(2007)

CAUTION

Danger due to dropping heavy loads

The battery leak detector is heavy and can injure persons and property through tipping

over or dropping.

► Only place the battery leak detector on a sufficiently stable and level surface.

NOTICE

Property damage due to vibration

Parts of the measurement technology rotate and must not be shaken. The parts

continue to rotate for several minutes after the Gas Detection Unit is shut down.

► Place the Gas Detection Unit, the Gas Control Unit and the optional vacuum

chamber only on a non-slip, stable, vibration and shock-free surface.

► Make sure that the gas detection unit is not exposed to shocks during operation for

at least five minutes after being switched off.

The battery leak detector consists of the following subcomponents: a Gas Detection

Unit, a Gas Control Unit and an optional vacuum chamber. The installation,

connection and startup of the battery leak detector must only be carried out by

INFICON employees.

• In order not to distort the measurement results, select a location where the room

temperature for the battery leak detector is as constant as possible.

• In order to avoid blocking the exhaust openings on the underside of the device,

place the feet of the unit on a firm, even surface.

• To easily reach the power switch on the back of the Gas Detection Unit, ensure

that there is sufficient free space behind the device.

• Make sure that the transport protection has been removed, see "Transport

protection [

}

23]".

• Do not expose the device to direct sunlight.

5.3 Design of device

DANGER

Health risk due to gases and vapors

Operation of the battery leak detector may produce hazardous vapors.

► Connect the Gas Detection Unit and the Gas Control Unit to an exhaust line.

► Do not inhale harmful gases or vapors.

► Ensure sufficient ventilation at the installation location.

Summary of Contents for ELT3000











































































Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands

Inficon ELT3000, Translation Of The Original Operating Instructions

Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands