Inficon ELT3000 Translation Of The Original Operating Instructions Download Page 67

Page: 67 / 74

INFICON

Decommissioning | 9

ELT3000-Battery Leak-Detector-Operating-instructions-mina95en1-10-(2007)

67 / 74

9 Decommissioning

Disposal

The device can contain substances that are hazardous to health and the environment

after use.

Observe the local regulations on disposal and on recycling documentation obligations.

If you are not familiar with how to properly dispose of hazardous substances, consult a

professional disposal company.

Our service employees are also available to answer any questions you may have.

9.1 Return shipment of battery leak tester

WARNING

Danger due to harmful substances

Contaminated devices could endanger health. The contamination declaration serves

to protect all persons who come into contact with the device.

► Fill in the declaration of contamination completely.

Contact the manufacturer and send in a completed declaration of contamination

before return shipment.

You will then receive a return number.

Use the original packaging when returning.

Always include a copy of the completed contamination declaration before

shipping the battery leak tester. See below.

Summary of Contents for ELT3000











































































Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands

Inficon ELT3000, Translation Of The Original Operating Instructions

Search results

Summary of Contents for ELT3000

Reviews:

Related manuals for ELT3000

Brands by name

Popular brands