Inficon Contura S400 Translation Of The Original Operating Instructions Download Page 35

Page: 35 / 68

INFICON

Operation | 6

Contura® S400-Operating-instructions-jina91en1-09-(2001)

35 / 68

6.5 Measurement data and device information

6.5.1 Recall data

> Measurements

The measurements performed are displayed in short form line by line.

To display the detailed view of a measurement, tap on an entry and then on the

displayed symbol

All information stored for this measurement is displayed.

6.5.2 Graphical display of the measurement data

> Chart

The display shows the measurement data of the set time interval.

To set the time interval and the measurement of products, select

. You can

limit both the measurement period and the products displayed.

6.5.3 Transferring measurement data

Measurement results are automatically saved in the device. The last 500,000

measurements are saved. You can transfer data from the internal memory to a

connected USB flash drive.

Operator or Supervisor rights

To transfer data from the internal memory, connect a USB flash drive with

FAT32 formatting to any of the USB ports of the device.

> Measurements

Save

All measurement data are transferred. There is an indication when the transfer is

completed. The data remain saved on the device.

6.5.4 Export measurement data via network

In addition to access to the graphical user interface, you also have the option of

retrieving specific measurement data from your leak detector.

A data interface was implemented for this purpose (REST interface). This interface

responds to requests on port 3000 when valid parameters are transmitted with data in

the requested format.

A network connection has been established between the leak detector on one side

and the PC or Tablet on the other side. See also “Operate leak detector via web

browser (LAN) [

}

58]“.

Summary of Contents for Contura S400





































































Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands

Inficon Contura S400, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands