Inficon Contura S400 Translation Of The Original Operating Instructions Download Page 21

Page: 21 / 68

INFICON

Operation | 6

Contura® S400-Operating-instructions-jina91en1-09-(2001)

21 / 68

6 Operation

6.1 Switch on and login

► To switch on the device, press the power button.

When delivered the device shows the measurement screen.

6.2 Basic settings

6.2.1 Setting the language

You can set the language in the user settings, see "Select, modify, create user profile

[

}

22]".

6.2.2 Setting date, time and time zone

Supervisor - rights

> Date and time

Set up.

Save

6.2.3 User profile settings

6.2.3.1 Overview of Rights Groups

The rights of auser depend upon which group he belongs to.

User

Members of the group

User can

• select between saved products,

• perform ZERO measurements,

• perform measurements,

• view history of the measurement results,

• view device information,

• view error logs.

Operator

Members of the group

Operator have all the rights of the group User. Moreover,

they can

• create / modify / delete products,

Summary of Contents for Contura S400





































































Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands

Inficon Contura S400, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands