Inficon Contura S400 Translation Of The Original Operating Instructions Download Page 37

Page: 37 / 68

INFICON

Operation | 6

Contura® S400-Operating-instructions-jina91en1-09-(2001)

37 / 68

All measurement data is deleted.

6.5.6 Call device information

►

> Device information

The stored information will be displayed.

6.5.7 Call log

Button to display device messages in list form. This information is useful when you

contact the manufacturer's service.

►

> Log

6.6 Updating the software

The device has two different software versions: One for the user interface and one for

the basic unit. Each has its own independent versions number.

6.6.1 Update the user interface software

Import software updates using a USB flash drive.

NOTICE

Data loss due to an aborted connection

► Do not switch off the device and do not remove the USB flash drive while the

software is being updated!

Copy the file into the main directory of a FAT32 formatted USB flash drive.

Connect the USB flash drive to a USB port on the device.

> Update > Update Operating Unit

At the top in the window the active software version of the user interface is

shown.

If one or more versions of the software are on the USB flash drive the most

recent version is shown on the line below. If this is the same as the version

already installed the background is green, otherwise it is red.

In order to load the new software version, press on the button "Update".

After completion there is an automatic restart of the operating unit.

6.6.2 Updating the software of the basic unit

Import software updates using a USB flash drive.

Summary of Contents for Contura S400





































































Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands

Inficon Contura S400, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands