Inficon Contura S400 Translation Of The Original Operating Instructions Download Page 29

Page: 29 / 68

INFICON

Operation | 6

Contura® S400-Operating-instructions-jina91en1-09-(2001)

29 / 68

WARNING

Risk of injury due to loud noise emissions

The device can emit sounds at the highest level of the set volume up to a level of 100

dB (A).

► Set a volume up to a maximum of "50".

► Use suitable hearing protection at set volumes above "50".

Operator or Supervisor rights

> Device

Set up.

Save

6.2.8 Automatic measurement starting ON or OFF

The option "Autostart" is activated in the factory setting. If you select the function

"Measurement" or "ZERO" and then close the measurement chamber, the selected

process is started automatically. For this purpose, the signal from a proximity switch is

used. You can set the "Autostart" option to ON or OFF.

Operator or Supervisor rights

> Device

Set up.

Save

If the automatic measurement start is OFF, press the "START" button on the

touchscreen or on the housing to start the measurement.

6.2.9 Lighting on or off

The option "Lighting" is enabled by factory settings. Switching off the lighting has no

effect on the measurement result.

Operator or Supervisor rights

> Device

Set up.

Save

Summary of Contents for Contura S400





































































Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands

Inficon Contura S400, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands