Inficon Contura S400 Translation Of The Original Operating Instructions Download Page 10

Page: 10 / 68

3 | Shipment, Transport, Storage

INFICON

10 / 68

Contura® S400-Operating-instructions-jina91en1-09-(2001)

3 Shipment, Transport, Storage

Scope of delivery

Item

Quantity

Leak detector (basic unit)

Power supply cable

Specimen (CON-Check)

Textile mesh

Operating instructions

Quick Guide to Measurement Settings

Unpacking instructions

► Check the delivery after receipt of the product to make sure it is complete.

CAUTION

Risk of injury from lifting the heavy device

The device weighs approx. 54 kg and can slip out of your hands.

► Lift and transport the device only with two people.

► To lift get hold below the floor panel.

Transport

NOTICE

Damage caused by transport

Transport in unsuitable packaging material can damage the device.

► Keep the original packaging.

► Only transport the device in its original packaging.

Storage

Always store the device in compliance with the technical data, see "Technical Data".

NOTICE

Losses due to overly prolonged storage

The functional safety of the membranes of the measuring chamber is limited.

► Do not store membranes for more than 3 years.

► Store the leak detector or other membranes in a dry place and protected from light.

Summary of Contents for Contura S400





































































Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands

Inficon Contura S400, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Contura S400

Reviews:

Related manuals for Contura S400

Brands by name

Popular brands