Indulogix ILVFE-1W0075, User Manual

Page: 31 / 81

ILVFE-series
user manual
31
Chapter 3 - Programming and Parameters
Chapter 3 provides a complete listing and description of the HPVFE parameters. Parameters are
programmed (viewed/edited) using the integral keypad. Refer to Appendix B for catalog numbers.
For information on… See page..
About parameters 30
Parameter organization 31
Display group 32
Basic program group 37
Terminal Block group 42
Communications group 47
Advanced program group 49
Parameter cross reference – by name 60
About parameters
Chapter 3 provides a complete listing and description of the ILVFE drive parameters. Parameters are
programmed (viewed/edited) using the integral keypad. Refer to Appendix B for catalog. To configure
a drive to operate in a specific way, drive parameters may have to be set. Three types of parameters
exist:
•
ENUM
ENUM parameters allow a selection from 2 or more items. Each item is represented by a
number.
•
Numeric Parameters
These parameters have a single numerical value (i.e. 0.1 Volts).
•
Bit Parameters
Bit parameters have four individual bits associated with features or conditions. If the bit is 0,
the feature is off or the condition is false. If the bit is 1, the feature is on or the condition is true.
Some parameters are marked as follows:
= Stop drive before changing this parameter
= 32 bit parameter. Parameters marked 32 bit will have two parameter numbers when using
RS485 communications and programming software.