42
ILVFE-series
user manual
P110 [Decel time 1]
Related Parameter(s): P108, P109, t201, t202, A402, A410 - A413
Sets the rate of acceleration for all speed increases.
Values
Default:
10.0 Secs
Min/Max:
0.1/600.0 Secs
Display:
0.1 Secs
P111 [Motor OL ret]
Related Parameter(s): P103
Enables/disables the Motor Overload Retention function. When Enabled, the value held in the motor
overload counter is saved at power-down and restored at power-up. A change to this parameter
setting resets the counter.
Options
0
"Disabled" (Default)
1
"Enabled"
P112 [Reset to defaults]
Related Parameter(s): d012, P107
Resets all parameter values to factory defaults
Options
0
"Idle state" (Default)
1
"Reset defaults"
After the reset function is complete, this parameter will set itself back to "0". Causes an F48 Params
defaulted fault.
Stop drive before changing this parameter
Summary of Contents for ILVFE-1W0075
