Indulogix ILVFE-1W0075, User Manual

Page: 21 / 81

ILVFE-series
user manual
21
Input Connection example
Potentiometer
1 ~ 10k
Ω Pot. recommended
(2 Watt minimum)
P108 [Speed ref.]= 2 (0-10V Input)
Analog input
0 ~ 10V, 100k
Ω impedance
4 ~ 20mA, 100
Ω impedance
Voltage
P108
[Speed ref.]= 2
(0-10V Input)
Current
P108
[Speed ref.]= 3
(4-20mA Input)
Analog input: PTC
For detecting drive fault
Wire the PTC and External Resistor (typically matched to the
PTC Hot Resistance) to I/O Terminals 12, 13, 14.
Wire R2/R3 Relay Output (SRC) to I/O Terminals 5 & 11.
t201 [Digital In Sel.]= 3 (Aux fault)
t221 [Relay Out Sel.]= 10 (above anlg V)
t222 [Relay Out Level.]= % voltage trip
2-wire SRC control:
non-reversing
P106 [Start Source] = 2, 3 or 4
Input must be active for the drive
to run.
When input is opened, the drive
will stop as specified by
P107
[Stop Mode].
If desired, a User Supplied 24V
DC power source can be used.
Refer to the “External Supply
(SRC)” example.
Internal supply (SRC) External supply (SRC)