Indulogix ILVFE-1W0075, User Manual

Page: 28 / 81

28
ILVFE-series
user manual
Integral keypad
Menu Description
Display Group(View Only)
Consists of commonly viewed drive
operating conditions.
Basic Program Group
Consists of commonly used
programmable functions.
Terminal Block Group
Consists of programmable functions for
control terminals.
Communications Group
Consists of programmable functions for
communications.
Advanced Program Group
Consists of remaining programmable
functions.
Fault Designator
Consists of list of codes for specific fault
conditions. Displayed only when fault is
present.
No. LED LED state Description
① Run/Direction
status Steady red Indicates drive is running and commanded motor direction.
Flashing red Drive has been commanded to change direction. Indicates
actual motor direction while decelerating to zero.
② Alphanumeric
display Steady red Indicates parameter number, parameter value, or fault code.
Flashing red Single digit flashing indicates that digit can be edited.
All digits flashing indicates a fault condition.
③
Displayed
units Steady red Indicates the units of the parameter value being displayed.
④ Program
status Steady red Indicates parameter value can be changed.
⑤
Fault status Flashing red Indicates drive is faulted.
⑥
Pot status Steady green Indicates potentiometer on Integral Keypad is active.
⑦ Start key
status Steady green Indicates Start key on Integral Keypad is active.
The Reverse key is also active unless disabled by A434
[Reverse Disable].