Indulogix ILVFE-1W0075, User Manual

Page: 63 / 81

ILVFE-series
user manual
63
Chapter 4 - Troubleshooting
Chapter 4 provides information to guide you in troubleshooting the ILVFE drive. Included is a listing
and description of drive faults (with possible solutions, when applicable).
Drive status
The condition or state of your drive is constantly monitored. Any changes will be indicated through the
integral keypad.
LED indications
See chapter 2 for information on drive status indicators and controls.
Faults
A fault is a condition that stops the drive. There are two fault types.
Type Fault description
①
Auto-reset/Run
When this type of fault occurs, and A451 [Auto rstrt tries] is set to a value
greater than “0,” a user-configurable timer, A452 [Auto rstrt delay], begins.
When the timer reaches zero, the drive attempts to automatically reset the
fault. If the condition that caused the fault is no longer present, the fault
will be reset and the drive will be restarted.
②
Non-resetable
This type of fault may require drive or motor repair, or is caused by wiring
or programing errors. The cause of the fault must be corrected before the
fault can be cleared.
Drive is indicating a fault
The integral keypad provides visual notification of a fault condition by displaying the following.
•
Flashing fault number
•
Flashing fault indicator
Press the Escape key to regain control of the integral keypad.