IMO Jaguar CUB, Instruction Manual

Page: 44 / 170

3-2
Simultaneous keying
Simultaneous keying means depressing two keys at the same time (expressed by "+"). Jaguar CUB
supports simultaneous keying as listed below.
(For example, the expression " + keys" stands for pressing the key while holding down the
key.)
Operation modes Simultaneous keying Used to:
Running mode Control entry to/exit from jogging operation.
+ keys
Programming
mode
+ keys
Change special function code data.
(Refer to codes F00 and H03 in Chapter 5
"FUNCTION CODES.")
Alarm mode + keys
Switch to Programming mode without resetting
the alarm.
3.2 Overview of Operation Modes
Jaguar CUB features the following three operation modes:
■ Running mode : This mode allows you to enter run/stop commands in regular operation.
You may also monitor the running status in realtime.
■ Programming mode : This mode allows you to set function code data and check a variety of
information relating to the inverter status and maintenance.
■ Alarm mode : If an alarm occurs, the inverter automatically enters this Alarm mode in
which the corresponding alarm code* and its related information may be
displayed on the LED monitor.
*Alarm code: Shows the error factor that has activated the protective function. For details, refer to Chapter 8,
Section 8.6 "Protective Functions."
Figure 3.1 shows the status transition of the inverter between these three operation modes.
Figure 3.1 Status Transition between Operation Modes
3.2.1 Running Mode
If the inverter is turned on, it automatically enters Running mode in which you may:
(1) Run/stop the motor
(2) Set up the set frequency and others
(3) Monitor the running status (e.g., output frequency, output current)
(4) Jog (inch) the motor
For details, refer to Section 3.3, "Operation in Running mode."