E211101X_rev02_ENG
29/06/2022
20
IMPORTANT
!
After the cycle has been started, all the parameters described so far can be changed using the relative display
icons: these changes, however, will not remain in the program's memory.
When the desired program is displayed on display, simply press the START icon to start it, the following images will
appear:
The rotation of the roller and simultaneously heating will be started.
While the machine is running, it is possible to adjust the temperature, speed, and ironing pressure (see relevant
paragraphs).
At the first achievement (after switching on) of the set temperature value, the buzzer emits some beeps, to warn the
user.
In any case, do not start the ironing work until the minimum temperature of 80 ° C is reached.
At the end of the ironing cycle, the machine must be stopped by pressing the COOL DOWN
button:
in this case the
machine will continue to keep the roller in rotation until it reaches 80 ° C, a temperature considered safe for the
complete shutdown by the general switch of the machinery (see the dedicated chapter).
Avoid pressing the
STOP
button to interrupt an ironing cycle if the safety temperature of 80°C has not already been
reached.
ATTENTION!
The machines described here should not be used to perform bending. We therefore invite you to avoid folding
the fabrics to be ironed one or more times, before introducing them into the drying calendar!
During operation it must be remembered to use the entire length of the roller, to keep uniform temperature over the
entire length of the machine.
Therefore, regardless of the size of the linen, introduce the same as shown in the figure.
