E211101X_rev02_ENG
29/06/2022
6
ATTENTION!
To move the machine, use a forklift truck that can bear the weight to be lift: check with care the data on the technical
sheet. Any up/down movement must be very slow.
ATTENTION!
The forklift truck must be used only by qualified and expert personnel.
NOTE: until the installation place has been reached, the ironer can be moved by its length direction, using two manual
forklifts as shown in the below picture.
Once the installation place has been reached, the machine must be completely unpacked, making it free from the PVC.
Open the two side doors using the appropriate key and take off the bolts fixing the machine to the pallet. The bolts are
on the base of the machine side.
Lift the machine to remove the pallet and lay the machine on the final position.
The packing material must not be spread on the environment but must be collect in the appropriate collecting place as
per the normative in force.
ATTENTION!
In case lifting belts are used, be sure that they are not touching the introduction rollers while the ironer is lift or moved!
