E211101X_rev02_ENG
29/06/2022
25
29.
MACHINE EQUIPPED WITH FEEDER
In case of machine equipped with automatic feeder, the main display shows the following icons:
Here below the icons descriptions:
5.1: activation of the automatic feeder. If the icon background is green the system is on, otherwise it is off.
5.2: activation of the vacuum table suction fan If the icon background is green the system is on, otherwise it
is off.
5.3: this icon enables the brush rotation speed control. It this icon is touched the screen shows:
The actual speed is displayed, it is a value between 1 and 10. To modify the speed:
-
Touch the icon “rabbit” to increase the speed
-
Touch the icon “Turtle” to decrease the speed
When the wished speed is displayed, touch the icon “OK?”
The new speed is set, and the main screen appears.
NOTE: the feeder must be used on all the ironer length, so when it is selected it is possible only to select the
fold for the whole table.
When the machine is set to collaborate with the automatic feeder, it is possible to use it.
Insert the linen extremities inside the two pliers and make free the linen as much as possible to make easier
the introduction.
When the linen is correctly fixed on both extremities, press the green button. The button is light on when the
feeding operation is possible. If the button is light off, wait.
ATTENTION!
in case it is necessary to abort the feeding cycle, press the red button in the middle of the feeder
NOTE: pressing this button the machine is not stop, only the feeding cycle is aborted.
30.
ALARMS: IRONER WITH FOLDING SYSTEM
While the machine is working an alarm may occur, in this case a buzzer starts, and a red triangle appears on
the main screen (10)
