E211101X_rev02_ENG
29/06/2022
8
To check the correct position of the ironer, use a at least 1-meter-long water level, and lay it above the belt’s separator,
where it is possible to arrive opening the back panel.
To adjust the feet, open the side doors and screw or unscrew the feet threaded bar. Unscrew with a nr 19 key the lock
nut.
Adjust the height of the threaded pivot using a nr 8 key until the machine is perfectly horizontal. Once the correct
position has been obtained, screw again the nut with the nr 19 key until the threaded bar is locked.
If necessary, repeat the same operation for each of the eight feet.
Check the correct leveling of the machine as follows:
-
Check the leveling first on one side, and then on the other side of the machine
-
Then check the leveling in the central part of the machine
For a correct use, working and maintenance, leave at least 500 mm free behind the machine.
