E211101X_rev02_ENG
29/06/2022
17
Ironing must be conducted scrupulously following the indications given in the labeling of the fabrics.
In case of absence of labeling, check the composition of the fabrics before deciding on the ironing temperature.
Pay special attention to mixed fabrics and fabrics with seams of heterogeneous material.
16.
WHAT TO DO IN CASE OF ENTRAPPING
The risk is reduced by the presence of hand-saving protection. If, however, the entrapping of a limb occurs, it is
necessary to be able to manually reverse the rotation of the roller, to be able to free the limb.
In this case, follow these steps.
Remove the power supply by turning the main switch by placing it on "0".
Use the key, supplied with the documentation, to open the lock of the side door.
Open the door by rotating it on the base
Rotate the flyer:
-
clockwise: to turn the roller in the opposite direction to the ironing and free the trapped limb.
ATTENTION!
If the temperature of the roller is high (above 80°C), continue to insert wet fabrics over the entire length of the
roller, and continue to rotate the roller by hand, to avoid burning of the ironing bands.
Once completed, close the door with the key and wait for the return of the power supply.
When the power supply returns, turn the main switch by placing it on “me.” The microprocessor display turns on again
and the machine is placed on standby, waiting for a new start-up command.
ATTENTION!
To make sure that all the personnel who use the machine have well understood the procedure to free a trapped
limb. Perform six-monthly exercises to verify the correct understanding of the procedure.
17.
WHAT TO DO IN CASE OF LACK OF ELECTRICITY
If the power supply is lost, it is possible that one or more garments stay inserted between the roller and the ironing
bands risking burning out.
It is also possible that, if the temperature is above 80 ° C, even the ironing bands risk burning.
In this case, follow these steps. Remove the power supply by turning the main switch by placing it on "0".
Use the key, supplied with the documentation, to open the lock of the side door.
Open the door by rotating it on the base
