GB-25
7. REFERENCE
Ratings: Pole Chain Saw BAS 3020
Motor
Engine output
kW
1,0
Engine type
2-stroke
Cubic capacity
cm³
30
Fuel
lubricated petrol
40:1
Tank volume
ml
600
Maximum engine speed min
-1
10.500
Idling speed
min
-1
3.000
Max. speed of the cutting tool
min
-1
8.500
Fuel consumption
kg/h
0.
38
Weight
kg
4,9
Pole chain saw
Chain speed m/sec 21
Cutting length ” / mm
8 / 203
Chain type Oregon 91PJ033X
Toothing 7T - 3/8”P
Oil tank volume ml 150
Noise level
dB (A)
102
[K=3,0 dB(A)]
Vibration - full throttle
m/s
2
13,254
[K=1,5 m/s²]
Vibration - idling speed m/s
2
6,954
[K=1,5m/s
2
]
Brush Cutter / Grass Trimmer
Cutting diameter
(blade)
cm
23
Cutting diameter
(nylon line)
cm
43
Cord diameter
mm
2,2
Overall cord length
m
2 x
2,5
Cord extension
Tap’n go
Noise level
dB (A)
94,5
[K=3,0 dB(A)]
Vibration - full throttle
m/s
2
9,9
[K=1,5 m/s²]
Vibration - idling speed
m/s
2
3,2
[K 1,5 m/s
2
]
measured acoustic capacity level
dB (A)
109,7
[K 3,0 dB(A)]
guaranteed acoustic capacity level
dB (A)
according to 2000/14/EG
112
Technical changes reserved.
The Pole chain saw are manufactured in accordance with the provisions of EN ISO 11680-1 and fully comply with the
provisions of the German Equipment and Product Safety Act.
The brush cutter are manufactured in accordance with the provisions of EN ISO 11806-1:2011 and fully comply with
the provisions of the German Equipment and Product Safety Act.
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons
with other petrol equipment as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its fitted equipment, and be
higher than the one indicated. Safety measures must be established to protect the user and must be based on the load
estimate generated by the vibrations in real usage conditions. In this regard, all the operational cycle phases must be
taken into consideration, such as switching off or idle running.
Warning:
Prolonged exposure to vibrations can cause injuries and neurovascular disorders (also called “Renaud’s
syndrome”or “white hand”), especially to people suffering from circulation disorders. The symptoms can regard the
hands, wrists and fingers and are shown through loss of sensitivity, torpor, itching, pain and discolouring of or structural
changes to the skin. These effects can be worsened by low ambient temperatures and/or by gripping the handgrips ex-
cessively tightly. If the symptoms occur, the length of time the machine is used must be reduced and a doctor consulted.
When working with the device, a certain level of noise cannot be avoided. Noisy work should be scheduled for hours,
during which it is allowed by statute or other local regulations. Adhere to any applicable rest times and limit your work-
ing time to the necessary minimum time. For your personal protection and the protection of people nearby, suitable
hearing protection must be worn.
