![background image](http://html1.mh-extra.com/html/ifm/ecomat-300-as-i-series/ecomat-300-as-i-series_basic-device-manual_3950763127.webp)
ifm
Basic Device Manual AS-i ControllerE M4 Target V15
2015-10-30
Set-up
Configuration
127
11.2.2
Automatic addressing of individual slaves
Now address the slaves. This is possible by means of the keys and the text/graphics display on the
controllere. In the mode "Easy Startup" the controllere can address the slaves automatically in rising
order if the slaves are connected to the bus one after the other.
NOTE
However, this automatic process only works without problems if the slave to be connected has the
address 0! If the slave has already been used in another system, it will probably already have an
address other than 0.
In such a case, the controllere does not react to the connection of the new slave. This slave is not
automatically addressed.
Then
Password level 1 required
[MENU] > [Address Slave] > [Easy Startup] > select master > connect slave > [ESC]
1.
► Press [MENU]
M
M
E
E
N
N
U
U
0
U
U
S
S
E
E
R
R
2.
Quick Setup
PLC Setup
Slave Lists
► Press [▼] to scroll to [Address Slave]
O
O
K
K
1
▲
▼
E
E
S
S
C
C
3. PLC Setup
Slave Lists
Address Slave
► Select [Address Slave] with [OK]
O
O
K
K
1
▲ ▼
E
E
S
S
C
C