ifm
Basic Device Manual AS-i ControllerE M4 Target V15
2015-10-30
Function
Introduction AS-i data
39
Valid combinations IO code / ID code / extended ID code 2
Structure slave profile = S-[IO code].[ID code].[ext.ID code2]
x = any value (0…F)
IO code (hex)
ID code
(hex)
Ext. ID
code 2
(hex)
Description
7
4
x
Extended slave profile for 16-bit transmission with integrated support in the master;
integrated extended analogue profile for combined transmission type 1
(
Extended ID code 2 for analogue slaves with profile 7.4.x
7
4
C
RFID identification system for writing and reading RFID tags
15-bit data + 1-bit messages (e.g. DTA100)
7
5
5
Combi Field Slaves
– outputting and/or processing serial data as well as digital data
7
A
x
Slave operates in the "extended addressing mode" (B slave or A/B slave)
7
A
5
Slave operates in the "extended addressing mode" (B slave or A/B slave)
combined slave; supports combined transmission type 2
7
A
7
Slave operates in the "extended addressing mode" (B slave or A/B slave)
4 binary 4 binary outputs
7
A
8
Slave operates in the "extended addressing mode" (B slave or A/B slave)
1 channel for combined transmission type 4
7
A
9
Slave operates in the "extended addressing mode" (B slave or A/B slave)
dual channel for combined transmission type 4
7
A
A
Slave operates in the "extended addressing mode" (B slave or A/B slave)
8 binary 8 binary outputs
7
A
E
Slave operates in the "extended addressing mode" (B slave or A/B slave);
dual sensor with actuator interface (e.g. sensor AC2317);
2 binary 2 binary outputs
7
B
x
Safety slave with non-safe outputs
7
B
0
Safety slave with non-safe outputs;
2 safe binary inputs (e.g. I/O module AC005S)
7
B
E
Safety sensor with non-safe outputs;
3 safe binary inputs AND
2 safe binary outputs AND
2 non-safe (relay) outputs (e.g. I/O module AC009S)
7
D
x
Device for motor control (electromechanical)
7
D
0
Electromechanical motor control with open sub-profile
7
D
1
Electromechanical direct starter
7
D
2
Electromechanical reverser
7
D
3
Electromechanical direct starter with brake
7
D
4
Electromechanical reverser with brake
7
D
5
Electromechanical direct starter with accessories
7
D
6
Electromechanical reverser with accessories
7
E
x
Device for motor control (electronic)
7
E
0
Electronic motor control with open sub-profile
7
E
1
Electronic direct starter
7
E
2
Electronic reverser
7
E
3
Electronic direct starter with brake
7
E
4
Electronic reverser with brake
7
E
5
Electronic direct starter with accessories
7
E
6
Electronic reverser with accessories
8
1
x
4 binary outputs for 2 dual-signal actuators
B
1
x
Dual-signal actuator with feedback:
2 binary o 2 binary inputs
B
A
5
Slave operates in the "extended addressing mode" (B slave or A/B slave);
supports combined transmission type 2
B
A
E
Slave operates in the "extended addressing mode" (B slave or A/B slave);
2 binary o 2 binary inputs (e.g. AC2086 module)
D
1
x
Single actuator with monitoring:
1 binary 3 binary inputs
