IFM Ecomat 300 AS-i Series, Basic Device Manual

Page: 110 / 280

ifm Basic Device Manual AS-i ControllerE M4 Target V15 2015-10-30
Menu Main menu [System Setup]
110
9.11 Main menu [System Setup]
Set parameters for programming interfaces, update firmware, set access passwords, etc.
Menu tree Description
System Setup
Serial Port Baudrate
► Scroll between the possible baud rates of the serial
inte
rface with [▲] or [▼] → page
121
► Confirm the selected value with [OK]
Or: Abort with [ESC].
System Setup
Ethernet Setup
► Only functionable if an Ethernet programming interface is
available (option)!
→ supplementary device manual "Ethernet programming
interface" (option)
System Setup
Ethernet Setup
IP Address
> Display of the current IP address. The arrow
↑ indicates
the editable set of numbers.
To change it, the DHCP setup must be OFF.
► Go to the next set of numbers with [ 
]
► Change the set of numbers with [▲] or [▼]
► Once again [ 
] after the last set of numbers
> Display of new IP address
► Save new IP address with [OK]
> Display of the message "WAIT" while saving
> Return to the menu [IP Address]
System Setup
Ethernet Setup
SubNet Mask
> Display of the current subnet mask. The arrow
↑ indicates
the editable set of numbers.
To change it, the DHCP setup must be OFF.
► Go to the next set of numbers with [ 
]
► Change the set of numbers with [▲] or [▼]
► Once again [ 
] after the last set of numbers
> Display of new subnet mask
► Save new subnet mask with [OK]
> Display of the message "WAIT" while saving
> Return to the menu [Subnetz mask]
System Setup
Ethernet Setup
Gateway Address
> Display of the current gateway address. The arrow
↑
indicates the editable set of numbers.
To change it, the DHCP setup must be OFF.
► Go to the next set of numbers with [ 
]
► Change the set of numbers with [▲] or [▼]
► Once again [ 
] after the last set of numbers
> Display of new gateway address
► Save new gateway address with [OK]
> Display of the message "WAIT" while saving
> Return to the menu [Gateway Address]